Many men are dissatisfied with the parameters of their sexual organ and do not want to put up with it.Therefore, different methods are used to make the penis thicker and long.A device as a pump to increase a member is also widespread.
The operating principle of the device
Pomp is a cylindrical device.The device is designed so that it increases the penis of a man in length and width and increases the erection.
The pump acts on a simple principle.When it is used for the male penis, pressure occurs, which contributes to increasing blood flow, filling the cave -like bodies with blood.The same happens as with an erection.The penis becomes very difficult, swelling so that you can increase its parameters.
Varieties of pumps and pumps
The pump to increase the penis independently of the type has a single structure of the structure.It is a transparent piston that represents centimeters.There are also devices with which a vacuum is generated and the necessary pressure is maintained.
There are three types of pumps:
- Manual.The vacuum is created using a piston or a pear.Such devices have lower costs, so they are used frequently.However, men have to wait a long time for their use.
- Automatically.In this type of pump, the pressure in the piston is generated thanks to the electrical pump already built into the device.Batteries must be used for his work.Automatic devices are preferable because you have a high efficiency that you can control the pressure and absorption.
- Water.The latest type of pump.It differs in this water instead of air.Such a variety of increased, effective, effective, effective, has few contraindications and serves much longer than previous models.
Pomping is carried out in two ways.The first is called Packing.Its essence is to stretch the tunic and an increase in the penis in length, but not in width.To do this, use a narrow piston in which the penis cannot swell on the sides, but stretch.
The second method is classic pumps.In this case, a broad piston is used in which the penis has the opportunity to thresh in all directions.In this way you can increase the width and length of the organ.
Safety precautions must be observed during the exercises.
Selection criteria
The lover pump is selected taking into account the size of the penis and the purpose of using it.Experts advise the following:
- The length of the device should be more than 3 cm.
- The width should be more than the diameter of the penis per 2 cm.
- For beginners it is recommended to select a manual device type as it is easiest.
The above dimensions of the member are only taken into account.
In the case of the purchase process, it is worth paying attention to the materials from which the increased increase has been increased.The piston should be strong enough to avoid random damage to the male organ.
Contraindications
There may not be an increase in vacuum in men who suffer from the following pathologies:
- Thrombosis.
- Fibrose.
- Liver diseases.
- Kidney disease.
- Diabetes.
- Pathologies of heart and blood vessels.
- Sexually transmitted diseases.
- Statement in the work of the university.
If a man is not sure whether he can use a pump to increase the length and width of the penis, it is worth visiting the doctor for examination.
pros and cons
The vacuum pump enables men to not only make their dignity longer and wider.The device also helps to improve the erectile function and extend sexual contact by reducing the sensitivity of the organ.In addition, you can use the device to set the shape of the penis in the presence of curvature.
The negative sides of the pump only manifest themselves with their improper use.The non -compliance with the instructions contains many unpleasant consequences.
The effect of use
If you are constantly using the pump, the penis changes its size forever after 6 months.In order to achieve the maximum effect, it is recommended to take drugs that increase the production of sex hormones in men.However, this can only happen after consulting a doctor.
It is known that a pump and a pump to increase the penis are one and the same.
These, who have already tried the pump, notice that they could achieve the desired result.Six months later, the length of the penis increases by 3 cm and the thickness of 2 cm.
Instructions for use
In order to use a vacuum pump to increase the penis, no special skills have to be required.Before the process, the device should be treated with lubrication to ensure gliding.
A male member has to smear with a special cream, the effect of which enables us to normalize blood flow and to improve a bloodstorm on the penis.
Then place the genitals in the cylinder.Remove air from the piston to create a vacuum environment.As soon as redness occurs, 30 seconds have to wait and start air.The procedure should not take longer than 15 to 20 minutes.
Possible consequences
No wonder that a special instruction for the use of the pump was created.The implementation of all manipulations only avoids adverse consequences.But sometimes men neglect the rules.
As a result, you will receive the following instead of the desired centimeters:
- The development of a swollen ring on the base of the penis head.This occurs due to the stagnation of the lymphatic fluid.This phenomenon can also occur when using a vacuum device correctly.If this side effect is observed, you should stop using the device.
- The swelling of the penis due to the influx of a large amount of lymph.
- Worsening of the erectile function.
- Reddening of the penis, the appearance of bleeding.
- Thrombosis.The disease is a great threat to human life, but when the pump is used, this is extremely rare.
So that there are no negative consequences, it is not only important to use the pump correctly.It is also necessary not to ignore the presence of contraindications for its application.If this is the case, you should look for other methods to increase the penis.
Homemade devices
For men who do not want to spend money to buy a factory increase, it is possible to make it at home with their own hands.
From the cuff pump
To create an airless environment, the cuff has to turn your back.Then you have to put together the device again, but already in reverse order.
Next you have to create a valve to leave excess air.For this purpose you can apply the valve from the aquarium compressor.It must be associated with a suitable hose and a suitable seal.
From the compressor
You can take the compressor out of unnecessary cooling devices.After extracting the evaporator and the condenser, the pipes with which they are connected should be cut.Then connect the compressor with the network.
Take an air filter in every shop for drivers.It must be attached to the compressor hole.The filter must be connected to the rubber hose of the required size.Next, it only remains the effect of the device.
The pump helps, but the use of drugs that contain testosterone or the use of an extender using a pump is more important when using a pump.
Use a syringe
Take a plastic tube, cut three parts, the size of each should be 10 cm.Attach them to the T -shirt.The result is a discount of three bastards.
To the central withdrawal to attach a spray nose.Install valves on the manufactured side bends.
It is important that you open yourself and the second - inside.In order not to be confused in the future, you should draw arrows that display the air direction.
With plastic bottles
A fairly simple pump to increase the penis can be produced from ordinary plastic bottles.It is only important to choose a different size of containers.The larger one has to cut the upper part to create the cylinder shape.
Make holes at the bottom of the second bottle and insert it into the first container.It is important that no large gap is formed between the walls.Then you have to attach the hose to a large container.You can take it off the pump to pump the bikes on the bike.
Maintaining the device
In order to maximize the expansion of the lifespan, it is necessary to take care of it properly.If the device has only been bought and not yet used, it is necessary to rinse it thoroughly with soap and then too dry and treated with an antiseptic.Wash the device after each use.
You cannot treat the pump with hydrogen peroxide or boiling water and use fat with fats during the lubricant process.Otherwise, the risk of damage is high.